All submissions of the EM system will be redirected to Online Manuscript Submission System. Authors are requested to submit articles directly to Online Manuscript Submission System of respective journal.


Numerical simulation of multi-layer agitator blade in high temperature floating two-phase flow field

Author(s): Guini Yao

The mixed model in Eulerian multiphase fluid was adopted to simulate the macroscopic speed field of glass-semisolid aluminum-silicon alloy slurry in agitator bath of multi-layer agitator. Speed, viscosity, pressure, and temperature distribution were forecasted by this model. The forecasting results showed that radial and tangential speed were dominated in impeller area. The maximum value of axial speed was achieved in the lower and middle layer blade, while the maximum value of each layer blade existed in the edge and near axis place of the blade. The tangential speed of lower layer blade varied by the largest extent, which maximum value appeared in the edge and near wall place of the blade. The comparison between simulation and experimental results indicated the choice of this kind of agitator had advantage of the glass particles dispersion

Share this       

Table of Contents

Recommended Conferences

International Congress on Biotechnology

Tokyo, Japan

24th Global Congress on Biotechnology

Dubai, UAE
izmir escort izmir escort bursa escort antalya escort izmir escort porno porno izle türk porno eskişehir escort bartın escort burdur escort havalandırma izmir escort bursa escort porno indir izle escort izmir