Original Article
Synthesis and investigation of pillared layered / pyrrole
Author(s): Mohamed Y.Abed, Dalia Elsawy, Nahla A.Mansour, Manal G.Mohamed, A.Ashary, Azza M.Mazrouaa
Original Article, . 2014 Vol: 10( 6)
7187379870
All submissions of the EM system will be redirected to Online Manuscript Submission System. Authors are requested to submit articles directly to Online Manuscript Submission System of respective journal.
Volume 10, Issue 6
Original Article
Dispersion parameters of Cr2O3 thin films prepared by spray pyrolysis
Author(s): Sami Salman Chiad
Original Article, . 2014 Vol: 10( 6)
Original Article
Curing of posterior dental composites - A surface microhardness study
Author(s): Kavita Rai, Arun M.Xavier
Original Article, . 2014 Vol: 10( 6)
Original Article
Preparation and properties of starch-based film using N-(1-hydroxy-2-methylpropan-2-yl)formamide as a new plasticizer
Author(s): Jianmei Chen, Hongguang Dai, Xianliang Sheng, Naren Liu, Lirong Wang, Jiayu Zhang
Original Article, . 2014 Vol: 10( 6)
Original Article
Corrosion studies through open circuit potential determination of Zinc-Aluminium alloy in 1M NaCl solution by using Schiff base
Author(s): R.D.Pruthviraj , B.V.Somashekariah
Original Article, . 2014 Vol: 10( 6)
Original Article
Behaviour at high temperature of two cobalt-based superalloys reinforced by carbides. Part 1: Case of a high carbon {Co-1C-21.5Cr-4.5Ta-9W}-based superalloy
Author(s): Pierre-Yves Girardin, Adrien Frigerio, Patrice Berthod
Original Article, . 2014 Vol: 10( 6)
Original Article
High temperature oxidation of nickel-based alloys reinforced by hafnium carbides. Part 2: Metallography results
Author(s): Patrice Berthod, Elodie Conrath
Original Article, . 2014 Vol: 10( 6)
Original Article
Simulation of isothermal processes in uranium dioxide through molecular dynamics method using a parametrically temperature-dependent potential
Author(s): Yuri Sergeevich Nagornov, Andrey Valerievich Katz
Original Article, . 2014 Vol: 10( 6)
Original Article
Behaviour at high temperature of two cobalt-based superalloys reinforced by carbides. Part 2: Case of a medium carbon {Co-0.6C-23.5Cr-10Ni-3.5Ta-7W}-based superalloy
Author(s): Adrien FrigÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂério, Pierre-Yves Girardin, Patrice Berthod
Original Article, . 2014 Vol: 10( 6)
Original Article
Defects analysis, minimize metal wastages and yield improvement for grey cast iron casting: A case study
Author(s): K.M.Ranasiri, A.M.Muzathik
Original Article, . 2014 Vol: 10( 6)
Original Article
Nanostructured nickel-based composite thin film reinforced with graphite and different SiC nanoparticles
Author(s): Abbas Fahami, Bahman Nasiri-Tabrizi
Original Article, . 2014 Vol: 10( 6)
